Gaming Mat Display Counters

Gaming Mat Display Counters

Short Description:

Product Detail


Product Tags

If your artwork files do not meet our specifications, PakFactory is not responsible for any printing errors that can arise as a result. Read our Artwork Preparation Guide on how to prepare your files for submission or Contact Us to have a packaging specialist help!


Cut Line (Black Lines):

Indicates the cut at its final size. Important artwork and text should be placed at least 0.125 inches inside of the cut line.

Crease Line (Red Lines):

Indicates where the product is to be folded.

Bleed Line (Green Lines):

Indicates where the bleed line is located. Any artwork which goes to the cut line should be extended to the bleed line to get a seamless print.

Safety Margin(Dotted Green Lines):

Indicates where artwork and text should safely be placed inside. As an industry standard, all artwork should at least be placed 0.125 inches away from the cut line unless your design is intentional.

Perforation (Dotted Black Lines):

Perforation line refers to paper that is punched with very small holes to allow the paper to be torn and folded easily.

Our four tier cardboard display stand for counter or table top use is a general stand ideal for displaying a wide range of products. With a horizontal base to the tiers and a sturdy construction the stand can accommodate products up to 2″ (50mm) thick and up to 18″ (457mm) wide.

Typically used to display the following products :
DVD’s & Games
Small bottles

The only limitation really are items that are tall, thin and heavy, such as photo-frames taller than 8″ (200mm) – being top heavy these would have a tendency to tip the stand over backwards unless it was against a wall.

Each tier is 457mm (18″) wide, and 50mm (2″) deep.

The rise between tiers is 46mm (1.8″), showing 46mm of the top of products placed in the top three tiers.

The first tier has a front lip of 52mm (2″), hiding 52mm of the bottom of the product, while the other tiers have a lip of 38mm (1.5″).

Overall size of the stand is :
Width: 18.3″ (466mm)
Height: 10.7″ (271mm) without header board
Height: 17.7″ (450mm) with header board
Depth: 9″ (230mm)

We hold stock in three colours White, Black and Brown. 

We’re often asked about branding – this is possible but cost and method vary significantly based on quantity required. Contact us with quantities and requirements and we will quote, or give us a call if you would like advice.

Typically :
Printing header boards is viable from around 10 stands.
Fully printed stands is viable from around 500 stands.

Unless buying a large number of these stands we recommend taking them pre-assembled, but we can supply: 

Assembled : Stands are delivered ready to go (well almost you will need to pop the header board in the top). 
Flat packed : This is flat packed with assembly instructions. As with all flat packed items some people find them easy to assemble others less easy. We strongly suggest you watch the assembly video below before making a purchase and again before starting to assemble. In our experience people who do this usually don’t have issues. If you don’t feel comfortable or only want a couple of stands why not order pre-assembled and let us do the work.  
Flat Packed & Individually Boxed : These are still flat packed but each in it’s own box, this is typically for wholesalers who are onward shipping to their customers.

Once the stands are assembled they are designed to stay that way – there are a number of locking tabs in the process and trying to re-flat pack the stand is sure to reduce its life.

  • Previous:
  • Next:

  • Shipping Destination Arriving Time
    By Courier (DHL, Fedex,UPS,TNT ect.) Door to door 5-7 days
    By air Your airport 3-4 days
    By sea Your seaport 15-30 days
    If the delivery time is very urgent, we suggest you choose by courier or air.
    lf it is not hurry, we sug get you choose by sea, it is economy.


  • Write your message here and send it to us